SIRA24DP www.vishay.com vishay siliconix s16-2084-rev. a, 10-oct-16 1 document number: 75453 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 n-channel 25 v (d-s) mosfet features ? trenchfet ? gen iv power mosfet ? optimized q g , q gd , and q gd /q gs ratio reduces switching related power loss ? 100 % r g and uis tested ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? synchronous rectification ? high power density dc/dc ? synchronous buck converter ? load switching notes a. package limited. b. surface mounted on 1" x 1" fr4 board. c. t = 10 s. d. see solder profile ( www.vishay.com/doc?73257 ). the powerpak 1212-8 is a lead less package. the end of th e lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. a solder fillet at the exposed copper tip cannot b e guaranteed and is not required to ensure adequa te bottom side sold er interconnection. e. rework conditions: manual soldering with a solderin g iron is not recommended for leadless components. f. maximum under steady stat e conditions is 70 c/w. g. t c = 25 c. product summary v ds (v) 25 r ds(on) max. ( ? ) at v gs = 10 v 0.00140 r ds(on) max. ( ? ) at v gs = 4.5 v 0.00240 q g typ. (nc) 17.2 i d (a) 60 a, g configuration single powerpak ? s o-8 s ingle top view 1 6.15 mm 5.15 mm bottom view 4 g 3 s 2 s 1 s d 8 d 6 d 7 d 5 n-channel mosfet g d s ordering information package powerpak so-8 single lead (pb)-free and halo gen-free SIRA24DP-t1-ge3 absolute maximum ratings (t a = 25 c, unless otherwise noted) parameter symbol limit unit drain-source voltage v ds 25 v gate-source voltage v gs +20 / -16 continuous drain current (t j = 150 c) t c = 25 c i d 60 a a t c = 70 c 60 a t a = 25 c 44.5 b, c t a = 70 c 35.6 b, c pulsed drain current (t = 100 s) i dm 150 continuous source-drain diode current t c = 25 c i s 56.8 t a = 25 c 4.5 b, c single pulse avalanche current l = 0.1 mh i as 30 single pulse avalanche energy e as 45 mj maximum power dissipation t c = 25 c p d 62.5 w t c = 70 c 40 t a = 25 c 5 b, c t a = 70 c 3.2 b, c operating junction and storage temperature range t j , t stg -55 to +150 c soldering recommendations (peak temperature) c 260 thermal resistance ratings parameter symbol typical maximum unit maximum junction-to-ambient b t ? 10 s r thja 20 25 c/w maximum junction-to-case (drain) steady state r thjc 1.7 2
SIRA24DP www.vishay.com vishay siliconix s16-2084-rev. a, 10-oct-16 2 document number: 75453 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes a. pulse test; pulse width ? 300 s, duty cycle ? 2 %. b. guaranteed by design, not su bject to production testing. ? stresses beyond those listed under absolute maximum ratings ma y cause permanent damage to th e device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those in dicated in the operational sectio ns of the specifications is not implied. exposure to absolute maximum rating conditions for extended pe riods may affect device reliability. specifications (t j = 25 c, unless otherwise noted) parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = 250 a 25 - - v v ds temperature coefficient ? v ds /t j i d = 10 ma - 21 - mv/c v gs(th) temperature coefficient ? v gs(th) /t j i d = 250 a - -4.8 - gate-source threshold voltage v gs(th) v ds = v gs , i d = 250 a 1 - 2.1 v gate-source leakage i gss v ds = 0 v, v gs = +20 / -16 v - - 100 na zero gate voltage drain current i dss v ds = 25 v, v gs = 0 v - - 1 a v ds = 25 v, v gs = 0 v, t j = 70 c - - 15 on-state drain current a i d(on) v ds ? 10 v, v gs = 10 v 40 - - a drain-source on-state resistance a r ds(on) v gs = 10 v, i d = 15 a - 0.00115 0.00140 ? v gs = 4.5 v, i d = 10 a - 0.00195 0.00240 forward transconductance a g fs v ds = 15 v, i d = 15 a - 75 - s dynamic b input capacitance c iss v ds = 10 v, v gs = 0 v, f = 1 mhz - 2650 - pf output capacitance c oss - 1015 - reverse transfer capacitance c rss - 197 - total gate charge q g v ds = 10 v, v gs = 10 v, i d = 15 a - 36.5 55 nc v ds = 10 v, v gs = 4.5 v, i d = 15 a - 17.2 26 gate-source charge q gs -7.4- gate-drain charge q gd -3.3- gate resistance r g f = 1 mhz 0.2 0.75 1.35 ? turn-on delay time t d(on) v dd = 10 v, r l = 1 ? , i d ? 15 a, v gen = 10 v, r g = 1 ? -1224 ns rise time t r -2346 turn-off delay time t d(off) -1836 fall time t f -1020 turn-on delay time t d(on) v dd = 10 v, r l = 1 ? , i d ? 15 a, v gen = 4.5 v, r g = 1 ? -1836 rise time t r -4284 turn-off delay time t d(off) -1734 fall time t f -1734 drain-source body diode characteristics continuous source-drain diode current i s t c = 25 c - - 56.8 a pulse diode forward current i sm - - 150 body diode voltage v sd i s = 5 a, v gs = 0 v - 0.73 1.1 v body diode reverse recovery time t rr i f = 10 a, di/dt = 100 a/s, t j = 25 c -3264ns body diode reverse recovery charge q rr -2040nc reverse recovery fall time t a -17- ns reverse recovery rise time t b -15-
SIRA24DP www.vishay.com vishay siliconix s16-2084-rev. a, 10-oct-16 3 document number: 75453 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (25 c, unless otherwise noted) output characteristics on-resistance vs. drain current and gate volta g e gate char g e transfer characteristics capacitance on-resistance vs. junction temperature 10 100 1000 10000 0 30 60 90 120 150 00.511.522.5 axis title 1st line 2nd line 2nd line i d - drain current (a) v ds - drain-to-source voltage (v) 2nd line v gs = 10 v thru 4 v v gs = 3 v v gs = 2 v 10 100 1000 10000 0 0.0006 0.0012 0.0018 0.0024 0.0030 0 20406080100 axis title 1st line 2nd line 2nd line r ds(on) - on-resistance () i d - drain current (a) 2nd line v gs = 4.5 v v gs = 10 v 10 100 1000 10000 0 2 4 6 8 10 0 8 16 24 32 40 axis title 1st line 2nd line 2nd line v gs - gate-to-source voltage (v) q g - total gate charge (nc) 2nd line v ds = 5 v, 10 v, 15 v i d = 10 a 10 100 1000 10000 0 30 60 90 120 150 012345 axis title 1st line 2nd line 2nd line i d - drain current (a) v gs - gate-to-source voltage (v) 2nd line t c = 25 c t c =-55 c t c = 125 c 10 100 1000 10000 0 640 1280 1920 2560 3200 0 5 10 15 20 25 axis title 1st line 2nd line 2nd line c - capacitance (pf) v ds - drain-to-source voltage (v) 2nd line c rss c oss c iss 10 100 1000 10000 0.7 0.9 1.1 1.3 1.5 1.7 -50-25 0 255075100125150 axis title 1st line 2nd line 2nd line r ds(on) - on-resistance (normalized) t j - junction temperature (c) 2nd line i d = 15 a v gs = 10 v v gs = 4.5 v
SIRA24DP www.vishay.com vishay siliconix s16-2084-rev. a, 10-oct-16 4 document number: 75453 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (25 c, unless otherwise noted) source-drain diode forward volta g e on-resistance vs. gate-to-source volta g e threshold volta g e sin g le pulse power, junction-to-ambient safe operatin g area, junction-to-ambient 10 100 1000 10000 0.001 0.01 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1.0 1.2 axis title 1st line 2nd line 2nd line i s - source current (a) v sd - source-to-drain voltage (v) 2nd line t j = 150 c t j = 25 c 10 100 1000 10000 0 0.002 0.004 0.006 0.008 0.010 0246810 axis title 1st line 2nd line 2nd line r ds(on) - on-resistance () v gs - gate-to-source voltage (v) 2nd line t j = 25 c t j = 125 c i d = 15 a 10 100 1000 10000 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 -50 -25 0 25 50 75 100 125 150 axis title 1st line 2nd line 2nd line v gs(th) - variance (v) t j - temperature (c) 2nd line i d = 5 ma i d = 250 a 10 100 1000 10000 0 40 80 120 160 200 0.001 0.01 0.1 1 10 axis title 1st line 2nd line 2nd line power (w) time (s) 2nd line 10 100 1000 10000 0.01 0.1 1 10 100 1000 0.01 0.1 1 10 100 axis title 1st line 2nd line 2nd line i d - drain current (a) v ds - drain-to-source voltage (v) (1) v gs > minimum v gs at which r ds(on) is specified i dm limited limited by r ds(on) (1) t c = 25 c single pulse bvdss limited 100 ms 10 ms 1 ms 10 s 1 s i d limited
SIRA24DP www.vishay.com vishay siliconix s16-2084-rev. a, 10-oct-16 5 document number: 75453 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (25 c, unless otherwise noted) current deratin g a power, junction-to-case power, junction-to-ambient note a. the power dissipation p d is based on t j max. = 150 c, using junction-to-ca se thermal resistance, and is mo re useful in se ttling the upper dissipation limit for cases where additional heatsinking is used. it is used to determine the cu rrent rating, when this rating falls below the package limit. 10 100 1000 10000 0 35 70 105 140 175 03570105140175 axis title 1st line 2nd line 2nd line i d - drain current (a) t c - case temperature (c) 2nd line package limited 10 100 1000 10000 0 15 30 45 60 75 0 255075100125150 axis title 1st line 2nd line 2nd line power (w) t c - case temperature (c) 2nd line 10 100 1000 10000 0 0.5 1.0 1.5 2.0 2.5 0255075100125150 axis title 1st line 2nd line 2nd line power (w) t a - ambient temperature (c) 2nd line
SIRA24DP www.vishay.com vishay siliconix s16-2084-rev. a, 10-oct-16 6 document number: 75453 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (25 c, unless otherwise noted) normalized thermal transient impedance, junction-to-ambient normalized thermal transient impedance, junction-to-case ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? vishay siliconix maintains worldw ide manufacturing ca pability. products may be manufactured at one of several qualified locatio ns. reliability da ta for silicon technology and package reliability represent a composite of all qu alified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?75453 . 10 100 1000 10000 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 axis title 1st line 2nd line normalized effective transient thermal impedance square wave pulse duration (s) 2nd line 0.1 0.05 0.02 single pulse duty cycle = 0.5 0.2 p dm t 1 t 2 1. duty cycle, d = 2. per unit base = r thja = 70 c/w 3. t jm -t a = p dm z thja (t) 4. surface mounted t 1 t 2 notes: 10 100 1000 10000 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 axis title 1st line 2nd line normalized effective transient thermal impedance square wave pulse duration (s) 2nd line 0.1 0.05 0.02 single pulse duty cycle = 0.5 0.2
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
